Ultimum (612-XXX)
Click here to download the Manual in PDF format. Available in all languages.
The scooter is suitable for 5 years old or above. It is not a toy, but sports equipment for physical training, it is not intended for use in extreme sports such as jumping, ollie ramps, etc.This product should never be used at a skate park for an “aggressive” use (challenging skateboarding moves, etc.).
Warning! Protective equipment consisting of wrist protectors, gloves, knee pads, helmets and elbow pads should be worn.
Warning! T-bar folding and unfolding shall be done by an adult. The scooter can only be used by children once the adjustment is done.
Remove the scooter and all the parts from the box. Set out all the parts and read the assembly instructions prior to use. Keep the packaging until assembly is complete.
General instructions
This toy must be assembled by a responsible adult. Prior to use, make sure that the toy has been assembled properly.
Remove all the parts that are not necessary for play before giving the toy to your child.
The toy should be used with caution since skill is required to avoid falls or collisions causing injury to the user or third parties.
Use with suitable protective equipment, including a helmet, shoes, elbow, wrist, and knee protectors. Teach the child how to use it safely and responsibly.
Directions
- Use with caution on a flat, clean, dry surface and, if possible, away from other users, and obey the road safety rules.
- Check local laws regarding scooter use, respect all the traffic rules and signs. Stay away from other pedestrians or users on public roads.
- Best when used on a flat, dry surface free of gravel and grease. Avoid bumps and drainage grates that might cause an accident.
- Always use under adult supervision.
- Do not allow more than one child to ride the scooter at the same time.
- Do not use on wet days, or on wet ground.
- Store the product in a cool, dry place. Avoid direct sunlight.
Before and after use
To prevent pinched fingers, carefully follow the instructions of unfolding and folding. Make sure that the locking mechanisms are securely locked:
- Check the height of the steering system and make sure that the nuts are tightened and the handlebars and front wheel are perpendicular.
- Check all of the connection elements: the brake, the quick release system of the steering column and the wheel axles must be correctly adjusted and must not be damaged.
- Also check the wheels’ wear.
Braking
- A brake is located at the rear, when necessary, press down on it to slow down. Press down gradually to prevent skidding or loss of stabi-lity. The metal brake may heat up after multiple uses. Avoid touching it during and after use.
Adjustable steering angle control system
An adjustable knob located at the top of the scooter deck allows you to control the turning radius of the front wheels. Turn the knob clockwise for the turning angle to decrease. Turn the knob anti-clockwise for the turning angle to increase.
Assembling the product
Insert the handle bar (T-bar) tube into the hole at the front of the main board between the two front wheels while paying attention to the direction of insertion.
Ensure the spring loaded button pops out and locks the bar in place properly.
ULTIMUM is provided with an adjustable T-bar which can be adapted to the user’s height (6 positions). The spring loaded button shall be in the hole when adjusting the T-bar height.
Make sure that for the lowest position ofT-bar, the button is locked into the lowest hole. Loosen the quick release clamp of the T-bar when adjusting. Tighten the quick release clamp to secureT-bar after adjustment.
Fold & Unfold The Scooter Safely
Fold up the scooter from standing mode:
- Press the button on the bottom of the T-bar and pull it up until it is free to turn.
- Turn the T-bar until it comes to lie horizontally.
- Lock it in position by pushing it into the hole until it “clicks” in. It is now in trolley mode and you can carry it around.
Unfold the scooter from trolley mode:
- Press the button on the bottom of the T-bar and pull it up until it is free to turn.
- Turn it carefully until the T-bar is vertically standing on the deck.
- Push in the T-bar until you hear a “click” sound and make sure the T-bar is securely locked before playing.
Disassemble the T-bar from the deck:
- Press the button on the bottom of the T-bar and pull it up until it is free to turn.
- Turn the T-bar and watch the Globber ring around the hole.
- Align the 2 pins on the T-bar with the slots of the Globber ring, so that it can then be pulled out easily.
Warning! Be careful when you do any installation and transformation work. While turning the T-bar, make sure no other people are in the close vicinity around the scooter since theT-bar turns requires a big turning angle. Keep the kids in a safe distance while installing & transforming the scooter to avoid accidental injuries.
Warning! Risk of injury by pinching! Do not insert your fingers into the shaded area indicated.
During use
- Standing on the scooter, with one hand on each handle, push with one of your feet to move forward. Proceed with caution at the start.
- Shoes are mandatory and we strongly recommend wearing pants and long sleeve shirts to avoid injury if you fall.
- The scooter does not include any headlights or lights. It is therefore not suitable for use at night or during periods when visibility is limited
DO NOT FORGET TO REGULARLY TIGHTEN ALL BOLTS AND SCREWS TO AVOID MISALIGNMENT OR LOSS OF THE SCREW.
Care / Maintenance
Regular maintenance is a safety commitment:
- Wheel bearings: avoid going through water, oil or sand as this can damage wheel bearings. To look after the wheel bearings, systematically check that the wheels turn properly by turning the scooter upside-down and using your hand to spin the wheels. If the wheels do not spin they must be removed to check their condition. First unscrew the wheel axle, remove the axle and detach the wheel, then carefully push the two wheel bearings out of their housing. If they are chipped or dented, new ones should be bought. If there is no visible damage, they must then be oiled. To do this, remove all traces of grease, mud or dust with a kitchen towel or cloth, and re-oil them with a grease spray or by leaving them to soak overnight in oil [turn them several times in the oil first]. Then reassemble the wheel bearings and axles, followed by the wheel, onto the scooter. Proceed in the same manner for the other wheel.
- Wheels: the wheels wear down with time and can be pierced if overly used on rough surfaces. The back wheel on which the brake is applied is particularly affected after several hours of braking. In the interests of safety, they should be checked regularly and changed if necessary.
- Modifications: the original product must by no means be modified except for the maintenance-related changes mentioned in these instructions.
- Nuts, axles and other self-locking fixings: these should also be checked regularly. They can become loose after a while in which case they should be tightened. They can become worn and not tighten properly, in which case they should be replaced.
Warranty
The manufacturer warranties this product to be free of manufacturing defects for period of 2 years from the date of purchase. This limited warranty does not cover normal wear and tear, tire, tube or cables, or any damage, failure or loss caused by improper assembly, maintenance, or storage.
This limited warranty will be void if the product is ever:
- used in a manner other than for recreation or transportation;
- modified in any way;
- rented
The manufacturer is not liable for incidental or consequential loss or damage due directly or indirectly to the use of this product.
Globber does not offer an extended warranty. If you have purchased an extended warranty, it must be honoured by the store at which it was purchased.
For your records, save your original sales receipt with the physical manual and write the product name below.
Additional info
For questions and inquiries please contact us through the contact form.