Skip to main content

ELITE DELUXE LIGHTS (444-4XX)

Download the Manual

Click here to download the Manual in PDF format. Available in all languages.

Safety

For 3 years old and above. Not to be used in traffic. 50kg max.

Warnings

Use with caution on a flat, clean, dry surface and, if possible, away from other users, and obey the road safety rules.

Check local laws regarding scooter use, respect all the traffic rules and signs. Stay away from other pedestrians or users on public roads.

Best when used on a flat, dry surface free of gravel and grease.Avoid bumps and drainage grates that might cause an accident.

Warning! Not suitable for children under 36 months, unstable base, fall hazard. Protective equipment should be worn. T-bar folding and unfolding shall be done by an adult. The scooter can only be used by children once the adjustment is done.

Remove the scooter and all the parts from the box. Set out all the parts and read the assembly instructions prior to use. Keep the packaging until assembly is complete.

ELITE LIGHTS (448-XXX) / ELITE DELUXE FLASH LIGHTS (449-XXX) / ELITE PRIME (444-8XX)​

WARNING! This product is powered by two built-in CR2032 lithium batteries. Due to their small size, lithium batteries can easily be swallowed by children. Ingestion of such batteries has been known to cause death.

WARNING: This toy produces flashes that may trigger epilepsy in sensitised individuals. This toy contains batteries that are non-replaceable. Replace the electronic module when the batteries are exhausted.

WARNING: This product contains a coin battery.A coin battery can cause serious internal chemical burns if swallowed.

WARNING: Dispose of used batteries immediately. Keep new and used batteries away from children. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.

Warning!

A coin battery is hazardous; Keep away from children (whether the battery is new or used); The coin battery can cause severe or fatal injuries in 2 hours or less if it is swallowed or placed inside any part of the body; The medical attention should be sought immediately if it is suspected the battery has been swallowed or placed inside any part of the body.

General instructions​

This toy must be assembled by a responsible adult. Prior to use, make sure that the toy has been assembled properly. Remove all the parts which are not necessary for play before giving the toy to your child.The toy should be used with caution since skill is required to avoid falls or collisions causing injury to the user or third parties.

To use with suitable protective equipment, including a helmet, shoes, elbow, wrist and knee protectors. Teach the child how to use it safely and responsibly.

Directions​

  • The scooter can be dangerous and can cause traffic accidents when used on public highways. Don’t use on the public roads. It is best used on a flat, clean surface, free of gravel and grease.Avoid bumps and drainage grates that may cause an accident.
  • The scooter does not include any headlights or lights. It is therefore not suited for use at night or during periods when visibility is limited.
  • Always use under adult supervision.
  • Do not allow more than one child to ride the scooter at the same time.
  • Do not use on wet days, or on wet ground.

Before and after use​

  • Make sure that all locking mechanisms are securely locked:
  • Check the height of the steering system, and make sure the nuts are tightened and that the handlebars and the front wheel are perpendicular.
  • The minimum height of T-bar has to be locked at the lowest position by switching the bullet into the lowest slot.
  • Check all of the connection elements: the brake, the steering column’s quick release system and the wheel axles must be adjusted correctly and not damaged.
  • Also check the tyre wear.

SCOOTER ASSEMBLY (See Page 2 in PDF)​

Insert the handle bar (T-bar) tube into the hole at the front of the main board between the two front wheels while paying attention to the direction of insertion. Ensure the spring loaded button pops out and locks the bar in place properly.

ELITE is provided with an adjustable T-bar which can be adapted to the child’s height (4 positions). The spring loaded button shall be in the hole when adjusting the T-bar height.

Make sure that for the lowest position ofT-bar, the button is locked into the lowest hole. Loosen the quick release clamp of theT-bar when adjusting. Tighten the quick release clamp to secure T-bar after adjustment.

FOLD & UNFOLD THE SCOOTER SAFELY (See Page 2 in PDF)​

Fold up the scooter from standing mode​

Press the button on the bottom of theT-bar and pull it up until it is free to turn.Turn the T-bar until it comes to lie horizontally. Lock it in position by pushing it into the hole until it “clicks” in. It is now in trolley mode and you can carry it around.

Unfold the scooter from trolley mode​

Press the button on the bottom of theT-bar and pull it up until it is free to turn.Turn it carefully until the T-bar is vertically standing on the deck. Push in theT-bar until you hear a “click” sound and make sure theT-bar is securely locked before playing.

Disassemble the T-bar from the deck​

Press the button on the bottom of theT-bar and pull it up until it is free to turn.Turn the T-bar and watch the Globber ring around the hole.Align the 2 pins on the T-bar with the slots of the Globber ring, so that it can then be pulled out easily. Warning! Be careful when you do any installation and transformation work. While turning the T-bar, make sure no other people are in the close vicinity around the scooter since the T-bar turns requires a big turning angle. Keep the kids in a safe distance while installing & transforming the scooter to avoid accidental injuries

Steering​

ELITE’s steering responds intuitively to the movement of the body.

  • When the child leans to the right, ELITE turns right!
  • When the child leans to the left, ELITE turns left!

For the youngest children, on flat surfaces and in straight lines, ELITE has a steering blocking system for better balance and to make learning easier.

  • To lock the steering, press the button on the front part of the deck.
  • To release the steering, press the button under the deck.

During use​

  • Standing on the scooter, one hand on each handle, push with one foot to move forward. Proceed with caution at the start.
  • Braking: A brake is located at the rear; when necessary, press down on it to slow down. Press down gradually in order to prevent skidding or loss of stability.
  • Shoes are mandatory, and we strongly advise the child to wear trousers and long sleeve shirts to avoid injury in the event of a fall.
  • Explain to the child clearly how to use the scooter before any use

Care / Maintenance​

Regular maintenance is a safety commitment:

  • Wheel bearings: avoid going through water, oil or sand as this can damage wheel bearings. To look after the wheel bearings, systematically check that the wheels turn properly by turning the scooter upside-down and using your hand to spin the wheels. If the wheels do not spin they must be removed to check their condition. First unscrew the wheel axle, remove the axle and detach the wheel, then carefully push the two wheel bearings out of their housing. If they are chipped or dented, new ones should be bought. If there is no visible damage, they must then be oiled. To do this, remove all traces of grease, mud or dust with a kitchen towel or cloth, and re-oil them with a grease spray or by leaving them to soak overnight in oil [turn them several times in the oil first]. Then reassemble the wheel bearings and axles, followed by the wheel, onto the scooter. Proceed in the same manner for the other wheel.
  • Wheels: the wheels wear down with time and can be pierced if overly used on rough surfaces. The back wheel on which the brake is applied is particularly affected after several hours of braking. In the interests of safety, they should be checked regularly and changed if necessary.
  • Modifications: the original product must by no means be modified except for the maintenance- related changes mentioned in these instructions.
  • Nuts, axles and other self-locking fixings: these should also be checked regularly. They can become loose after a while in which case they should be tightened. They can become worn and not tighten properly, in which case they should be replaced.
  • Cleaning: Clean the scooter with a soft cloth and a little water.

Warranty​

The manufacturer warranties this product to be free of manufacturing defects for period of 2 years from the date of purchase. This limited warranty does not cover normal wear and tear, tire, tube or cables, or any damage, failure or loss caused by improper assembly, maintenance, or storage.

This limited warranty will be void if the product is ever:

  • used in a manner other than for recreation or transportation;
  • modified in any way;
  • rented

The manufacturer is not liable for incidental or consequential loss or damage due directly or indirectly to the use of this product.

Globber does not offer an extended warranty. If you have purchased an extended warranty, it must be honoured by the store at which it was purchased.

For your records, save your original sales receipt with the physical manual and write the product name below.

Additional info​

For questions and inquiries please contact us through the contact form.