Go Bike Elite Duo (712-XXX)
Click here to download the Manual in PDF format. Available in all languages.
For ages 2-5. Protective equipment should be worn. Not to be used in traffic. 20 kg max.
Remove the scooter and all the parts from the box. Set out all the parts and read the assembly instructions prior to use. Keep the packaging until assembly is complete.
Please carefully read the instructions before assembling and using the toy. Be careful when unpacking and assembling the product. This toy must be assembled by a responsible adult. Remove all the parts which are not necessary for play before giving the toy to your child.
General instructions
-
Prior to use, make sure that the toy has been assembled properly. Check the GO BIKE ELITE DUO before the child rides to determine if there are any potentially hazardous parts or conditions.
-
Children should be supervised by an adult while riding this GO BIKE ELITE DUO. Special care should be taken to instruct children in safe riding.
-
Do not use on highways, roads, traffic, or gravel or hilly areas; use on flat surfaces; examples of safe riding areas include public squares, sidewalks, backyards, parks, etc.
-
Do not use this toy near a staircase, on a slope, on a road, nor on a wet surface.
-
As the child becomes faster and more mobile on the GO BIKE ELITE DUO, the potential for hazards increases. At home, be sure to remove any breakable frames or mirrors hung too low and any object that could fall in the event of impact. Table corners can also be a danger.
-
Do not allow more than one rider on the GO BIKE ELITE DUO at a time.
-
Be sure the child wears clothes and appropriate footwear when using GO BIKE ELITE DUO.
-
Be sure the rider keeps both hands on the handlebars for proper control.
-
Do not allow the rider to wear anything that obstructs hearing and visibility or that impairs the function of the GO BIKE ELITE DUO.
-
The toy should be used with caution since skill is required to avoid falls and collisions causing injury to the user or third parties.
-
Always wear safety equipment (helmet, elbow-pads, knee-pads).
Assembling the product (See Page 4-5 in PDF)
The balance bike is packed with the clamp already fixed on the product directly in the box, meaning you will first have to open the clamp to insert the saddle tube.
Assembly instructions
-
Get the frame with the curve facing downward.
-
Insert the wheel fork into the frame’s stem.
-
Insert the handlebar's stem into the fork’s stem, and pull the handlebar up to make sure it’s locked.
-
Insert the saddle stem into the saddle tube of the balance bike frame. The minimum insertion depth for the saddle is where "MIN" is marked on the stem when placing it into the frame saddle tube. It should align with the top of the IIIIIIIIIII marking. This is the highest height of the saddle. Make sure the saddle is perpendicular with the handlebar. Tighten with the clamp. *Reminder: Make sure to tighten the clamp to securely fix the saddle.
-
Take the wheel to install on the rear of the balance bike. Take the 2 spacers, the long screw with the knob, and the additional knob to prepare the installation of the wheel.
-
Insert the long screw in the hole. Then, insert the first spacer on the long screw. Align the holes inside the wheel to insert the long screw into the bearing of the rear wheel. Next, add the second spacer on the other side of the rear wheel. Finally, tighten the second knob.
-
Make sure to push the red button on all knobs to the locked position.
Reminder: You can store the spacers on the bottom of the frame by opening the cover with a screwdriver (screwdriver not included) and placing them inside.
Transform the dual-rear wheel to a single rear wheel: (see diagram “A”)
-
Place the GO BIKE ELITE DUO upside down. Push the red button of the knobs on the rear wheel to the unlocked position and unscrew the knobs on the wheels. Then, pull out the long screw to remove both rear wheels as well as the spacers.
-
Take 1 of the wheels to install it on the rear of the balance bike. Use the 2 longer spacers for installation of the wheel.
-
Insert the long screw and the first longer spacer in the hole. Align the holes inside the bearing to insert the long screw into the bearing on the rear wheel. Next, add the second longer spacer on the other side of the rear wheel.
- Reminder: Make sure the spacers, the wheel, and the bearing are aligned before inserting the long screw.
- Tighten the rear wheel with the 2 knobs and make sure to push the red button on all knobs to the locked position
Adjusting the GO BIKE ELITE DUO
Adjust the height of the saddle so that your child can easily touch the ground with the full soles of his or her feet with slightly angled knees. The handlebar should be at a height that allows the arms to be held roughly horizontally. Test whether your child feels comfortable in this position and check the adjustments regularly, and always respect the levels of insertion.
How to ride
As soon as your child can pick up the GO BIKE ELITE DUO from the ground, he or she is capable of riding it. While you should instruct on safety, there is no need for you to give detailed training on how to ride the GO BIKE ELITE DUO; you can simply let the child try and watch what he or she does with it. Children are masters in learning, and you strengthen this capability by allowing them to try themselves. Normally, they find out rather quickly how the device can be moved and steered. Just make sure your child sits on the seat not on the bike frame.
Rolling
Push forward off the ground with the left and right foot in alternation. The more smoothly the feet roll off from heels to toes, the easier and faster your child will go.
Steering
The easiest way to steer the GO BIKE ELITE DUO is to turn the wheel and use leaning movements engaging core muscles, like back, abdominal, and gluteus. As soon as your child has understood this knack, he or she will be able to ride around jauntily. The GO BIKE ELITE DUO trains a sense of balance, stimulates physical and mental development, strengthens the back, and makes your child’s movements more secure and supportive.
Braking
The GO BIKE ELITE DUO can be braked by the feet. The child can stop moving by stopping walking/running. Please take care that your child can always stop from the speed he or she produces on the GO BIKE ELITE DUO. The child must always wear appropriate shoes when riding.
Maintenance and security
• Security checks: periodically check the GO BIKE to identify any loose or dislocated element—particularly the wheels, seat, and handlebars.
• Periodic cleaning will help to prolong the life of the product. Wipe the GO BIKE with a dry cloth if it has been soiled.
• Regularly check for any abrasions and avulsions.
• Regularly check that parts are not broken or damaged; if this happens, stop using this product.
• Regular checks can also prevent accidents.
Warranty
The manufacturer warranties this product to be free of manufacturing defects for period of 2 years from the date of purchase. This limited warranty does not cover normal wear and tear, tire, tube or cables, or any damage, failure or loss caused by improper assembly, maintenance, or storage.
This limited warranty will be void if the product is ever:
- used in a manner other than for recreation or transportation;
- modified in any way;
- rented
The manufacturer is not liable for incidental or consequential loss or damage due directly or indirectly to the use of this product.
Globber does not offer an extended warranty. If you have purchased an extended warranty, it must be honoured by the store at which it was purchased.
For your records, save your original sales receipt with the physical manual and write the product name below.
Additional info
For questions and inquiries please contact us through the contact form.