Learning Trike 3in1 Plus Ecologic (738-XXX)

Download the Manual

Click here to download the Manual in PDF format. Available in all languages.

WARNING

TO AVOID SERIOUS INJURY: Continuous adult supervision required; never use near motor vehicles; never use near streets, swimming pools, hills, steps, or sloped driveways; always wear shoes when using the product. Never allow more than 1 rider. Adult assembly required.

• Not to be used by children over the age of 3 years due to size limitation.
• Intended for children 12 months to 36 months.
• Maximum child’s weight: 44 lbs (20kg).
• Instruct children on proper use of this product before allowing them to ride.
• This product is not to be used in a manner other than for which it is intended.
• This product is intended for outdoor domestic family use only.
• It is recommended that rider always wear a properly fitted helmet that complies with U.S. Consumer Product Safety Commission (CPSC) Standard 16 CFR 1203.
• Do not step or stand on back of frame which will cause product overturned.
• Do not attempt to modify the product.

Warning!

Protective equipment should be worn. Not to be used in traffic. Please carefully read the instructions before assembling and using the toy. Be careful when unpacking and assembling the product.

This toy must be assembled by a responsible adult. Remove all the parts which are not necessary for play before giving the toy to your child. Do not step or stand on back of frame, which will cause the product to overturn.

Not to be used by children over 36 months. The product has insufficient strength for a child of that age/weight. Make sure the child’s feet can touch the ground freely while riding the product. Do not use on wet days, or on wet ground. Store the product in a cool, dry place. Avoid direct sunlight.

How to assemble LEARNING TRIKE 3in1 PLUS (GUIDED TRIKE mode)

1. Slot the front wheels’ head tube into the body frame of the LEARNING TRIKE 3in1 PLUS.
2. Insert the handlebars’ stem onto the front wheels’ head tube; push the handlebars’ stem down. Make sure the handlebars are placed in the correct direction and push-in the handlebar. Pull up the handlebars to make sure they are securely fixed.
3. Insert the basket in the front by sliding it.

Warning!

Don’t overload the basket. 500g (1.1lbs) max. Overloading the basket may cause a hazardous unstable condition.

4. To install the saddle, unscrew the knob located on the side of the saddle, insert the saddle into the LEARNING TRIKE’s frame. Then, push the saddle down or up until you align with one of the holes. Tighten the knob. The saddle is adjustable with 2 heights (27.1cm / 28.3cm).
5. To install the rear wheels, insert the rear wheels into the LEARNING TRIKE’s frame with the wheels facing outside. Make sure the push-button located on the side of the wheel is correctly inserted. Once it is in the correct position, make sure the rear wheels are secured by pulling on it.
6. Slide in the parent handle into the tube. Then install the parent handle at the rear of the product to push the LEARNING TRIKE 3in1 PLUS.
7. To install the pedals, press and hold the red pedal release tab on the front wheel hub, insert the pedal into the hub aligning the slot in the pedal with the arrow in the hub, release the tab, and push the pedal in up until reaching the first slot. Repeat the procedure on the other pedal. Check that the pedals are locked securely in place. This will set the pedal on the freewheel function that is recommended when the product is used in GUIDED TRIKE.

Transform from GUIDED TRIKE mode to TRAINING TRIKE mode

1. Remove the parent handlebar from the rear of the product.
2. Insert the pedals further in the front wheel to activate the pedaling function of the product.

Transform from TRAINING TRIKE mode to BALANCE BIKE mode

When your child has mastered his/her coordination and balance on the training trike, remove the pedals and transform the rear wheels to allow your child to ride the product as a balance bike:

1. Press the buttons under the legs to remove the rear wheels.
2. Turn the rear wheels over and reinsert them into the same legs so that the wheels are facing inward (facing each other) and push firmly until the wheels click into place.
3. Remove the pedals by pressing the pedal release buttons on the front wheel hub. Insert the pedals into the dedicated holes on the back of the saddle for storage.

Pedal functions

There are 2 setting for the pedal:

Freewheel function: by sliding the pedal in the middle position you will allow the pedal to turn without engaging the front wheel. This allows the parent to control the speed in GUIDED TRIKE MODE.

Regular function: Insert the pedal all the way in the slot to engage the front wheel when the kid is pedaling.

General instructions of use

• Prior to use, make sure that the product has been assembled properly. Check all the connection elements: Saddle, and handlebar must be correctly adjusted, and make sure that the locking mechanisms are securely locked. Check the product before the child rides to determine if there are any potentially hazardous parts or conditions.
• Children should be supervised by an adult while riding this product. Special care should be taken to instruct children in safe riding.
• Do not use on public highways; to be used on flat and gravel-free areas (playgrounds, public squares, paved pathways, etc.).
• Do not use this product near a staircase, on a slope, on a road, or on a wet surface.
• As your child grows and gains more mobility, the potential for hazards increases. At home, be sure to remove frames or mirrors hung too low and that could break, and any object that could fall in the event of impact. A corner table can also be a danger.
• Do not allow more than one rider on the product at a time.
• Be sure the child wears clothes and appropriate footwear when using product.
• Be sure the rider keeps both hands on the handlebars for proper control.
• Do not allow the rider to wear anything that obstructs hearing and visibility or that impairs the functioning of the product.
• The product should be used with caution since skill is required to avoid falls or collisions causing injury to the user or third parties.

Warning!

Protective equipment should be worn. Not to be used in traffic.Always wear safety equipment (helmet, elbow-pads, kneepads, gloves). This toy has no brake.

Braking

The product can be slowed by the feet. The child can stop moving by stopping walking/pedalling. Please take care that your child can always stop from the speed he/she produces and wears appropriate shoes.

Maintenance and security

• Security checks: Check periodically the product to identify any loose or dislocated elements, particularly the wheels, saddle, and handlebars.
• Periodic cleaning will prolong the life of the product . Wipe the product with a dry cloth if it has been soiled.
• Regularly check for abrasions and avulsions.
• Regularly check that parts are not broken or damaged; if this happens, stop using this product.
• Regular checks can prevent accidents.

Warranty

The manufacturer warranties this product to be free of manufacturing defects for period of 2 years from the date of purchase. This limited warranty does not cover normal wear and tear, tire, tube or cables, or any damage, failure or loss caused by improper assembly, maintenance, or storage.

This limited warranty will be void if the product is ever:

• used in a manner other than for recreation or transportation;
• modified in any way;
• rented

The manufacturer is not liable for incidental or consequential loss or damage due directly or indirectly to the use of this product.

Globber does not offer an extended warranty. If you have purchased an extended warranty, it must be honoured by the store at which it was purchased.

For your records, save your original sales receipt with the physical manual and write the product name below.

Additional info

For questions and inquiries please contact us through the contact form.