NL 230-205 DUO (686-XXX)
Click here to download the Manual in PDF format. Available in all languages.
For 14 years old and above. 100kg max.
The Scooter is suitable for adolescents and adults. It is not a toy, but sports equipment for physical training, it is not intended for use in extreme sports such as jumping, ollie ramps, etc.
This product should never be used at a skate park for an “aggressive” use (challenging skateboarding moves, etc.).
Use with caution on a flat, clean, dry surface and, if possible, away from other users, and obey the road safety rules.
Check local laws regarding scooter use, respect all the traffic rules and signs. Stay away from other pedestrians or users on public roads.
Best when used on a flat, dry surface free of gravel and grease.Avoid bumps and drainage grates that might cause an accident.
Warning! Protective equipment consisting of wrist protectors, gloves, knee pads, helmets and elbow pads should be worn.
Remove the scooter and all the parts from the box. Set out all the parts and read the assembly instructions prior to use. Keep the packaging until assembly is complete.
Using the scooter
-
Before and after each use: To prevent pinched fingers, carefully follow the instructions of unfolding and folding. Make sure that the locking mechanisms are securely locked:
-
Check the height of the steering system and make sure that the nuts are tightened and the handlebars and front wheel are perpendicular.
-
Check all of the connection elements: the brake, the quick release system of the steering column and the wheel axles must be correctly adjusted and must not be damaged.
-
Also check the tire wear.
-
Braking: A brake is located at the rear, when necessary, press down on it to slow down. Press down gradually to prevent skidding or loss of stability. The metal brake may heat up after multiple uses. Avoid touching it during and after use.
Assembling the product
- The folding and unfolding operations of the scooter are to be done by a single person.
- During these operations, be careful you do not get your fingers stuck in the hinge and locking system.
- Make sure that the locking devices are properly engaged.
1 - Unfold the scooter
D1: Unpack the folded-up scooter from its box.
D2: Hold the scooter, one hand is holding the handle and the other hand pulls away the eyelet trigger until the lock clicks open. Unfold the handle and front wheel upwards until the automatic lock secures the T-bar handle in upright position.
D3: Open the clamp lever on the T-bar. Pull out both parts of the T-bar handle from the double clips.Press in the spring loaded buttons and insert both into the tubes of the T-bar. Wiggle and turn a bit until their spring loaded locking buttons align with the holes and fix the whole steering bar assembly in place. Close clamp lever.
Warning! Risk of injury by pinching!
Do not insert your fingers into the shaded area indicated.
2 - Adjust the handle bar
D4: Open the fixing lug. Then press down the spring loaded locking button and pull the handlebar up or push it down with the other hand. Choose the suitable locking hole and make sure the spring loaded locking pin snaps securely in place. The adjustable T-bar handle can be adapted in height to suit the rider. Three different positions are available. Lock the fixing lug tight and securely when you have finished adjusting the height.
[Self-standing mode] D5: Pull the eyelet trigger slightly up to release the lock and fold back the T-bar just a tad. Release the eyelet trigger when the deck touches the ground. The scooter is now in self-standing mode. You can now leave the scooter standing in that position. You can park your scooter upright on any flat surface.
3 - Fold up the scooter
D6: Pull the eyelet trigger up to unlock the T-bar handle and pull back the T-bar handle a bit. Fold back the T-bar handle until it locks on the back brake plate. The locking mechanism and the eyelet trigger lock together with an audible click.
D7: You can grip the scooter by the T-bar handle and pull it behind you for easy transport. For purposes of storage, remove both parts of the T-bar handle from the T-bar. Press down the spring-loaded locking pins while pulling out the part sideways at the same time. Strings inside the tubes will hold the individual part together. Clip the two parts of the T-bar handle into the clips to both sides of the steering bar (refer to D3 in reverse order).
During use
- Standing on the scooter, with one hand on each handle, push with one of your feet to move forward. Proceed with caution at the start.
- Shoes are mandatory and we strongly recommend wearing pants and long sleeve shirts to avoid injury if you fall.
- The scooter does not include any headlights or lights. It is therefore not suitable for use at night or during periods when visibility is limited.
- Use the bell for ringing when alerting others of your approach. Move the lever to make a sound.
DO NOT FORGET TO REGULARLY TIGHTEN THE DIRECTION BLOCKS TO AVOID MISALIGNMENT OR LOSS OF THE SCREW.
Care / Maintenance
Regular maintenance is a safety commitment:
- Wheel bearings: avoid going through water, oil or sand as this can damage wheel bearings. To look after the wheel bearings, systematically check that the wheels turn properly by turning the scooter upside-down and using your hand to spin the wheels. If the wheels do not spin they must be removed to check their condition. First unscrew the wheel axle, remove the axle and detach the wheel, then carefully push the two wheel bearings out of their housing. If they are chipped or dented, new ones should be bought. If there is no visible damage, they must then be oiled. To do this, remove all traces of grease, mud or dust with a kitchen towel or cloth, and re-oil them with a grease spray or by leaving them to soak overnight in oil [turn them several times in the oil first]. Then reassemble the wheel bearings and axles, followed by the wheel, onto the scooter. Proceed in the same manner for the other wheel.
- Wheels: the wheels wear down with time and can be pierced if overly used on rough surfaces. The back wheel on which the brake is applied is particularly affected after several hours of braking. In the interests of safety, they should be checked regularly and changed if necessary.
- Modifications: the original product must by no means be modified except for the maintenance- related changes mentioned in these instructions.
- Nuts and axles: these should also be checked regularly. They can become loose after a while in which case they should be tightened. They can become worn and not tighten properly, in which case they should be replaced.
Technical Specifications
| Model No | NL230-205 DUO (686) - Age 14+ Scooter |
|---|---|
| User height | 1.55 - 2.0 m (5’1’’ - 6’6’’) |
| T-bar height | 101.5 - 111.5 cm (39.96’’ - 43.9’’) |
| Gross weight | 5.13 kgs |
Warranty
The manufacturer warranties this product to be free of manufacturing defects for period of 2 years from the date of purchase. This limited warranty does not cover normal wear and tear, tire, tube or cables, or any damage, failure or loss caused by improper assembly, maintenance, or storage.
This limited warranty will be void if the product is ever:
- used in a manner other than for recreation or transportation;
- modified in any way;
- rented
The manufacturer is not liable for incidental or consequential loss or damage due directly or indirectly to the use of this product.
Globber does not offer an extended warranty. If you have purchased an extended warranty, it must be honoured by the store at which it was purchased.
For your records, save your original sales receipt with the physical manual and write the product name below.
Additional info
For questions and inquiries please contact us through the contact form.