ONE K 180 PISTON DELUXE (676-XXX)

Download the Manual

Click here to download the Manual in PDF format. Available in all languages.

Safety

For 14 years old and above. 100kg max.

The scooter is reserved for adolescents and adults. It is not a toy, but sports equipment for physical training, it is not intended for use in extreme sports such as jumping, ollie ramps, etc. This product should never be used at a skate park for an “aggressive” use (challenging skateboarding moves, etc.).

Warnings

Use with caution on a flat, clean, dry surface and, if possible, away from other users, and obey the road safety rules.

Check local laws regarding scooter use, respect all the traffic rules and signs. Stay away from other pedestrians or users on public roads.

Best when used on a flat, dry surface free of gravel and grease.Avoid bumps and drainage grates that might cause an accident.

Warning! Protective equipment consisting of wrist protectors, gloves, knee pads, helmets and elbow pads should be worn.

Using the scooter

Before and after each use

• To prevent pinched fingers, carefully follow the instructions of unfolding and folding. Make sure that the locking mechanisms are securely locked:
• Check the height of the steering system and make sure that the nuts are tightened and the handlebars and front wheel are perpendicular.
• Check all connected elements; the brake and the wheel axles must be correctely adjusted, and must not be damaged.
• Also check the tire wear.

During use

• Standing on the scooter, with one hand on each handle, push with one of your feet to move forward. Proceed with caution at the start.
• Shoes are mandatory and we strongly recommend wearing pants and long sleeve shirts to avoid injury if you fall.
• The scooter does not include any headlights or lights. It is therefore not suitable for use at night or during periods when visibility is limited.

Braking

• A brake is located at the rear, when necessary, press down on it to slow down. Press down gradually to prevent skidding or loss of stability. The composite brake may heat up after multiple uses. Avoid touching it during and after use.
• A handlebar brake is located on the T-bar: a right brake handle to slow the front wheel. When using, keep riding the scooter with both hands.
• By pressing the handlebar brake lever and pushing the brake lock button down, you can lock the front wheel for storage in a vertical static position; unlock the brake lock button by pressing the brake.

Assembling the product

• The folding and unfolding operations of the scooter are to be done by a single person.
• During these operations, be careful you do not get your fingers stuck in the hinge and locking system.
• Make sure that the locking devices are properly engaged.

Warning!

Risk of injury by pinching! Do not insert your fingers into the shaded area indicated in the image.

1 - Unfold the scooter

Step 1: Hold the scooter upright, one hand holding the handle and the other hand pulls the scooter deck downwards until it clicks lock as shown in the drawing A.

Step 2: Take the hex wrench out of the box. Unscrew the 2 screws from the fixing lug, please pay attention and do not lose the washers. Place the middle of the handlebar (stripes engraved on the handlebar) into the fixing lug with the brake on the right.

2 - Adjust the handle bar

Open the clamp. Then press the spring-loaded button and pull the handlebar up or push it down with the other hand. Choose the suitable locking hole and make sure the spring-loaded button snaps securely in place. The adjustable T-bar handlebar can be adapted in height to suit the rider.

Three different positions are available. Lock the clamp tight and securely when you have finished adjusting the height.

3 Positions for ONE K 180 PISTON DELUXE:

• Low position: 89.5 cm

• Middle position: 94.5 cm

• High position: 99.5 cm

3 Positions for ONE K 200 PISTON DELUXE:

• Low position: 93 cm

• Middle position: 98 cm

• High position: 103 cm

3 - Folding the scooter

Put both hands on the handlebars, giving a slight kick on the pedal lock (diagram B). Thanks to the piston-assisted folding system, when you kick the mechanism on the bottom of the pole to fold the scooter, the back wheel will automatically lift up, to put the scooter in trolley mode (see diagram C).

DO NOT FORGET TO REGULARLY TIGHTEN THE DIRECTION BLOCKS TO AVOID MISALIGNMENT OR LOSS OF THE SCREW.

Care and maintenance

Regular maintenance is a safety commitment:

• Wheel bearings: avoid going through water, oil or sand as this can damage wheel bearings. To look after the wheel bearings, systematically check that the wheels turn properly by turning the scooter upside-down and using your hand to spin the wheels. If the wheels do not spin they must be removed to check their condition. First unscrew the wheel axle, remove the axle and detach the wheel, then carefully push the two wheel bearings out of their housing. If they are chipped or dented, new ones should be bought. If there is no visible damage, they must then be oiled. To do this, remove all traces of grease, mud or dust with a kitchen towel or cloth, and re-oil them with a grease spray or by leaving them to soak overnight in oil [turn them several times in the oil first].Then reassemble the wheel bearings and axles, followed by the wheel, onto the scooter. Proceed in the same manner for the other wheel.
• Wheels: the wheels wear down with time and can be damaged if overly used on rough surfaces. The back wheel on which the brake is applied is particularly affected after several hours of braking. In the interests of safety, they should be checked regularly and changed if necessary.
• Modifications: the original product must by no means be modified except for the maintenance-related changes mentioned in these instructions.
• Nuts and axles: these should also be checked regularly.
  • They can become loose after a while in which case they should be tightened.
  • They can become worn and not tighten properly, in which case they should be replaced.

Warranty

The manufacturer warranties this product to be free of manufacturing defects for period of 2 years from the date of purchase. This limited warranty does not cover normal wear and tear, tire, tube or cables, or any damage, failure or loss caused by improper assembly, maintenance, or storage.

This limited warranty will be void if the product is ever:

• used in a manner other than for recreation or transportation;
• modified in any way;
• rented

The manufacturer is not liable for incidental or consequential loss or damage due directly or indirectly to the use of this product.

Globber does not offer an extended warranty. If you have purchased an extended warranty, it must be honoured by the store at which it was purchased.

For your records, save your original sales receipt with the physical manual and write the product name below.

Additional info

For questions and inquiries please contact us through the contact form.