STROLL•UP 2in1 (920-XXX)
The stroller is suitable for children up to 22 kg or 4 years of age, whichever comes first.
Please read the instructions carefully before assembling and using the product. Keep the instructions for future reference.
Be careful when unpacking and assembling the product.
This product must be assembled by a responsible adult. Remove all packaging materials and plastic bags and assemble the product before giving it to your child.
Maximum child’s weight: 22kg
Do not use on wet days or on wet ground.
1. BOX CONTENT (see fig. 1):
Open the box and remove the below:
• Stroller
• Rear wheels
• Bumper bar
2. UNFOLDING THE STROLLER (see fig. 2):
2.a. Press the button located under the learning bike handlebar; lift the product to release the front wheels.
2.b. Pull the stroller handlebar backward and upward until you hear a click; the 'click' sound indicates the handlebar is fully unfolded and secured.
2.c. Press both buttons located under the seat to release it. Place the seat on the learning bike handlebar, and make sure the seat is securely fixed.
2.d. Lift the bumper bar.
3. REAR WHEEL ASSEMBLY & REMOVAL (See fig. 3):
3.a. Installation: • Insert the rear wheels into the bracket and a “click” sound will indicate that the wheels are safely installed.
3.b. Disassembly: • Press the button on the bottom of the wheel bracket and pull the rear wheels outward.
4. BUMPER BAR ASSEMBLY AND REMOVAL (See fig. 4):
4.a. Installation: • Attach the bumper bar by sliding into the catch until you hear the click sound.
4.b. Disassembly: • Press the lower buttons on both sides of the bumper bar and lift out to remove it.
5. CANOPY ADJUSTMENT (See fig. 5):
Pull the canopy forward to extend it and push it backward to fold it. You can further extend the canopy by opening the zip.
6. LEG REST ADJUSTMENT (See fig. 6):
Pull the lever underneath the leg rest to adjust the angle.
7. BACKREST ADJUSTMENT (See fig. 7):
7.a. To sit upright: Pull the strap on the rear of the backrest to move the seat upward.
7.b. To lie down: Release the clasp on the rear of the backrest to move the seat downward.
8. REAR VENTILATION WINDOW (See fig. 8):
8.a. Unzip the cover on both sides and roll it upward to offer extra ventilation.
8.b. Use the elastic band to secure the rolled-up cover.
9. PEAK-A-BOO WINDOW (See fig. 9):
9.a. Extend the canopy.
9.b. Release the magnetic peek-a-boo window for extra ventilation and to see your child.
10. PARKING DEVICE ADJUSTMENT (See fig. 10):
10.a. Step on the parking device to put the stroller in a stationary position.
10.b. Release the parking device by lifting it up.
11. SEAT BELT AND BUCKLE ADJUSTMENT (See fig. 11):
11.a. Connect the shoulder clips to the central buckle until you hear a click sound.
11.b. Make sure the buckle is securely closed.
11.c. To release, click on the button in the middle of the buckle.
12. FOLDING THE STROLLER (see fig. 12):
12.a. Make sure the canopy is closed.
12.b. Fold the bumper bar by pressing both upper buttons on each side.
12.c. At the same time, press both buttons under the seat to unlock it. Lift the seat until it locks in place in the upper frame. Make sure the seat is securely locked.
12.d. Press both buttons on the handlebar and push the handlebar forward to fold the product.
12.d. Press the button under the learning bike handlebar, lift the product and the wheels will fold under the product.
12.e. You can secure the folding by buttoning the parent strap around the learning bike handlebar. You can easily and securely carry the product with the shoulder strap.
13. TRANSFORM THE STROLLER TO A RIDE-ON:
13.a. Make sure the canopy is closed.
13.b. Fold the bumper bar by pressing both upper buttons on each side.
13.c. At the same time, press both buttons under the seat to unlock it. Lift the seat until it locks in place in the upper frame. Make sure the seat is securely locked.
13.d. At the same time, click on both buttons on the rear underside of the upper structure, just above the parking device. Pull the whole upper structure to separate it from the base. You can use the base as the learning bike.
14. TRANSFORM THE RIDE-ON TO A STROLLER:
14.a. Insert the upper structure into the rear of the learning bike. Ensure it is locked in place.
14.b. At the same time, press both buttons under the stroller seat to release it and place on the learning bike handlebar. Ensure the seat is securely fixed.
14.c. Lift the bumper bar.
15. CLEANING OF THE PADDING:
Remove the shoulder pads and the rear padding. Wash by hand and hang to dry.
General instructions of use
• Prior to use, make sure that the product has been assembled properly. Check the product before the child rides to determine if there are any potentially hazardous parts or conditions.
• Make sure child is kept clear of all moving parts (e.g. wheels) risk of injury.
• More mobility child grows; the more potential hazards increase. At home, be sure to remove frames or mirrors hung too low and could break, and any object that could fall in the event of impact. Corner table can also be a danger.
• Do not allow more than one rider on the product at a time.
• Be sure the child wears clothes and appropriate footwear when using product.
• Be sure the rider keeps both hands on the handlebars for proper control.
• Do not allow the rider to wear anything that obstructs hearing and visibility, or which impairs the functioning of product.
Maintenance and security:
• Do not machine wash or tumble dry the stroller's upholstery or storage basket. Hand wash is recommended.
• Avoid drying the stroller and fabric parts under excessive sun exposure, as it will cause the items to fade and degrade.
• When not using the stroller, store it in a cool and dry place. Do not expose the stroller under sunlight.
• Periodically lubricate the moving parts of the stroller, especially wheels axles to ensure they function smoothly.
• Check regularly for loose screws, damaged parts or broken stitches. Replace damaged parts if necessary.
• Regularly check the condition of abrasion and avulsion.
Warranty
The manufacturer warranties this product to be free of manufacturing defects for a period of 2 years from the date of purchase. This limited warranty does not cover normal wear and tear, tire, tubes, cables, or any damage, failure, or loss caused by improper assembly, maintenance, or storage.
This limited warranty will be void if the product is ever:
- used in a manner other than for recreation or transportation;
- modified in any way;
- rented
The manufacturer is not liable for incidental or consequential loss or damage due directly or indirectly to the use of this product.
Globber does not offer an extended warranty. If you have purchased an extended warranty, it must be honored by the store at which it was purchased.
For your records, save your original sales receipt with the physical manual and write the product name below.
Additional info
For questions and inquiries please contact us through the contact form.