GO•UP COMFORT LIGHTS (848-XXX) / GO•UP COMFORT LIGHTS 360 (849-XXX)
20 kg max.: Seat mode (ride-on, walking bike)
50 kg max.: Scooter mode
Warning! Protective equipment should be worn. Not to be used in traffic.
Seat mode: Not to be used by children over 36 months due to the limited strength of the seat bracket frame.
General instructions
This toy must be assembled by a responsible adult. Prior to use, make sure that the toy has been assembled properly. Remove all the parts which are not necessary for play before giving the toy to your child. The toy should be used with caution since skill is required to avoid falls or collisions causing injury to the user or third parties. To use with suitable protective equipment, including a helmet, shoes, elbow, wrist and knee protectors. Teach the child how to use it safely and responsibly.
Before and after each use
- Make sure that all locking mechanisms are securely locked.
- Check the height of the steering system, and make sure the nuts are tightened and that the handlebars and the front wheel are perpendicular.
- Check all of the connection elements and also check the tire wear.
- Regularly check for abrasions and avulsions.
- Regularly check that parts are not broken or damaged; if this happens, stop using this product. Repair or remove any damaged parts or components. Remove any sharp edges created through use.
- No modifications other than those in accordance with the instructions for use shall be made.
- Self-locking nuts and other self-locking fixings can lose their effectiveness after disassembly/reassembly.
- The scooter can be dangerous and can cause traffic accidents when used on public highways.
Installation and use of seat for ride-on / walking bike
- Use the L-key in-pack to unscrew the handlebar. Insert the handlebar into the seat and then tighten the screw to secure the handlebar.
- Place the footrest on the deck in the correct direction. Make sure the knob is tightened and securely fixed (see diagram XX).
- GO•UP COMFORT LIGHTS / GO•UP COMFORT LIGHTS 360 comes with a connector tube which is used to fix the seat. Assemble/set the tube according to the height of the child. For a comfortable ride, the child's feet should easily touch the footrest and the ground (see Figure 1).
Be careful to never leave the tube mounted on the deck of the scooter without the seat. Insert the connector tube into the front hole of the seat, following the correct direction of insertion to insert the screws.
- Insert the screws to fix the connector tube to the seat, and tighten with the knob (see figure 2).
- Insert the connector tube with seat in the front hole of the deck between the two front wheels, following the correct direction of insertion.
- Make sure the spring button is engaged and locked correctly as shown in figure 3.
Make sure the child's feet can touch the ground freely in seat mode before riding.
Seat mode (ride-on)
This toy has no brake in seat mode (foot braking). The product can be slowed by feet. The child can stop moving by stopping walking. Please take care that your child can always stop from the speed he/she produces and wears appropriate shoes.
Using the handlebars as the parent handle
The handlebar of the scooter can be used as a parent handle. Insert the handle into the back hole of the seat, respecting the correct direction of insertion. Make sure the spring-loaded button is engaged and locked correctly as shown in figure 4.
Install the patented rear turning module under the deck of the scooter. Make sure you securely tighten the knob and engage the safety lock, in red, located on the knob (see diagram 6).
Warning! Make sure to always remove the patented rear turning module when the product is not used in ride-on mode.
Walking bike mode
- Remove the handlebar tube in the back hole of the seat by pressing the 2 spring-loaded buttons.
- To remove the footrest, unscrew the knob on the footrest, then remove the footrest. Once the footrest is removed, cover the hole in the deck with the button in-pack (see diagram 8–10).
Make sure the child's feet can touch the ground freely in seated mode before riding.
Steering: The child pushes with his/her feet on the ground to advance, while the child's sitting on the seat. He/she must proceed with caution at first. The parent handle can be used to accompany the child.
Scooter assembly
- Insert the T-bar column into the integrated tube hole at the front of the scooter deck between the two front wheels.
- Make sure the spring button "clicks" into place for scooter mode, as shown in diagram A.
- GO•UP COMFORT LIGHTS / GO•UP COMFORT LIGHTS 360 comes with an adjustable handlebar that can be adapted to the child's height (4 positions).
- To safely secure a T-bar height, the bullet should fully click into the chosen hole. Make sure that for the lowest position of the T-bar, the bullet is locked into the lowest slot (see diagram E).
Steering
GO•UP COMFORT LIGHTS / GO•UP COMFORT LIGHTS 360 steering responds intuitively to the movement of the body (see diagram B):
- When the child leans to the right, GO•UP COMFORT LIGHTS / GO•UP COMFORT LIGHTS 360 turns right.
- When the child leans to the left, GO•UP COMFORT LIGHTS / GO•UP COMFORT LIGHTS 360 turns left.
For younger children, on flat surfaces and in straight lines, GO•UP COMFORT LIGHTS / GO•UP COMFORT LIGHTS 360 has a steering lock system to only go forwards and backwards for better balance and to make learning easier.
- To lock, press the button atop the front of the deck (see diagram C).
- To release, press the red button under the front of the deck (see diagram D).
During use
- Standing on the scooter, one hand on each handle, push with one foot to move forward. Proceed with caution at the start.
- Braking: A brake is located at the rear; when necessary, press down on it to slow down. Press down gradually in order to prevent skidding or loss of stability.
- Shoes are mandatory, and we strongly advise the child to wear trousers and long sleeve shirts to avoid injury in the event of a fall.
- Explain to the child clearly how to use the scooter before any use.
Care and maintenance
Regular maintenance is a safety commitment:
- Wheel bearings: Avoid going through water, oil, or sand as this can damage wheel bearings.
- Wheels: The wheels wear down with time and can be damaged if overly used on rough surfaces. The back wheel on which the brake is applied is particularly affected after several hours of braking. In the interests of safety, wheels should be checked regularly and changed if necessary.
- Modifications: The original product must by no means be modified except for the maintenance-related changes mentioned in these instructions.
- Nuts and axles: These should also be checked regularly.
- They can become loose after a while, in which case they should be tightened.
- They can become worn and not tighten properly, in which case they should be replaced.
- Cleaning: Clean the scooter with a soft cloth and a little water.
Spare parts
To order spare parts for this product, please visit globber.com.
Warranty
The manufacturer warranties this product to be free of manufacturing defects for a period of 2 years from the date of purchase. This limited warranty does not cover normal wear and tear, tire, tube or cables, or any damage, failure, or loss caused by improper assembly, maintenance, or storage.
This limited warranty will be void if the product is ever:
- used in a manner other than for recreation or transportation;
- modified in any way;
- rented
The manufacturer is not liable for incidental or consequential loss or damage due directly or indirectly to the use of this product.
Globber does not offer an extended warranty. If you have purchased an extended warranty, it must be honoured by the store at which it was purchased.
For your records, save your original sales receipt with the physical manual and write the product name below.
Additional info
For questions and inquiries please contact us through the contact form.