ADULT HELMET (513-515-XXX)
Click here to download the Manual in PDF format. Available in all languages.
This helmet is not suitable for roller acrobatics on ramps or in streets.
Complete protective equipment includes knee, elbow and wrist guard pads and helmet.
This helmet is design to protect impact cause by falling or ejected objects and collision of head with an obstacle while cycling or roller skating, it has passed EN 1078:2012+A1:2012 to show conformity to the EHSR of EU 2016/425, please read the following instructions carefully to ensure your safety.
Conform to European regulation (EU) 2016/425
Part I. How to fit a helmet.
A. Choosing the correct size helmet is very important. For optimum protection this helmet must fit comfortably on the head. Adjust the straps so that they form a «Y» below each ear then snap the buckle together and position the straps. The straps must be tighten against the throat and the loop closing being correctly locked, the buckle should be positioned away from the jawbone.
B. With the helmet on and tightly fastened, make sure it cannot be removed from your head or rolled forwards or backwards excessively.
C. When properly fitted and adjusted, your ears should not be covered by any part of the straps and your peripheral vision should not be blocked.
TURN RING
Place the helmet on your head. Turn the ring clockwise until the headband is firm yet comfortable. If you need to loosen the headband, TAKE THE HELMET OFF, turn the ring counterclockwise.
All fit adjustments must be made with the helmet in the proper position.
Failure to do this will result in a poor fit. A poor fit will allow the helmet to move out of position or come off in an accident. For proper turn ring operation, refer to the image in PDF.
Part II. Warnings
A. This helmet is made to absorb the energy of one significant blow. Even though damage may not be apparent, it is imperative that any helmet having suffered from an impact in an accident or received a severe blow, deep scratches or other abuse, should be replaced immediately. The lifespan of the helmet is 4 years from date of manufacture, After 2 years of usage of an average wearing time of 180 days of use per year, the helmet also has to be exchanged.
B. Only use your helmet for riding pedal cycle, skateboarding, in-line skating or roller skating. It is not designed for other sports or motor vehicle use.
C. WARNING! This helmet should not be used by children while climbing or doing other activities when there is risk of strangulation/hanging if the child gets trapped with the helmet.
D. Some injuries cannot be prevented by any helmet.
Part III. Helmet care.
A. Every time you use this helmet, check that nothing is badly torn, worn or missing.
B. Never remove or modify the original elements that constitute the helmet, or add accessories not recommended by the manufacturer, as it may put the protective role of the helmet at risk.
C. For cleaning your helmet, use only a soft cloth, mild soap and water.
D. The protection given by the helmet may be severely reduced by the application of the paint, adhesive stickers and transfers, cleaning fluids, chemicals and other solvents; use only materials recommended by the helmet manufacturer.
E. The helmet will be damaged if exposed to temperatures exceeding 60oC. If damaged, the helmet must be destroyed and replaced immediately.